official firmware lenovo a6000

official firmware lenovo a6000

This tag is associated with 1 post

How to Unbrick Lenovo A6000

NameSizeUrl
Frimeware Lenovo A6000_S035_150507_8G_ROW.7z1,2 GBDownload
QPST_2.7.422.7z25 MBDownload
Downloader_Lenovo_V1.0.2.7z1 MBDownload
LenovoA6000_USB_driver.7z9 MBDownload
Qualcomm_Usb_Driver.7z2 MBDownload
7-Zip.exeVariantsDownload

TWO METHODS FOR UNBRICK LENOVO A6000

Note : Always sew charged (preferably not less than 70%) of the smartphone!

( FIRST METHODS )

Installing the firmware using QFIL on Lenovo devices based on Qualcomm chips
5498006cae276_Chip.png
549801917d606_QualcommLogo.png
Preparatory stage.
1. Extracts using 7-Zip.exe and install drivers for chips Qualcomm and QPST.2.7.422.msi
2. Decompress A6000_S035_150507_8G_ROW.7z using 7-Zip.exe  to the root of any drive.
1.png
3. Check whether to install the necessary drivers.
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
Then we press the Volume Up key (Volume Up) and holding it connect USB-cable which is already connected to the USB 2.0 port of your PC – in the Device Manager device should appear Qualcomm Lenovo HS-USB QDLoader 9008
54980dd0da5da_0.png
Just install the firmware!
1. Run the utility QFIL (Start> All Programs> QPST> QFIL).
post-53625-0-67498900-1417520795.png
2. In the window QFIL fill in the following fields:
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn), for this click on Knop «Browse», in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then select the file prog_emmc_firehose_89XX. mbn and click “Open.”
Then click on the digging «Load XML …», in the window that opens, select one by one – firstrawprogram0.xml and click “Open” and then patch0.xml and also click “Open.”
2.png
3. Make sure that the program QFIL sees the device as Qualcomm Lenovo HS-USB QDLoader 9008.
3.png
4. Click on the button «Download» and wait for the end of the process.
The device should restart the process of filling in the successful firmware and boot into Android OS.
4.png
——————————————————————————————————

( SECOND METHODS )

Installing the firmware using Lenovo Downloaders.
1. Installing the USB driver
Download and unzip LenovoA6000_USB_driver.7z , Run as administrator and all items are selected by default, click Next everywhere
16b3a6cc24f21fe268814a2d6bd92f4d.png
2. To install the device in 9091 mode, I recommend to start the process of firmware A6000 turn off, holding down the Volume up, turn the power button A6000, after vibro release the power button, and then after a couple of seconds, releasing the volume – set the device to PC mode 9091.
Firmware smartphone through Downloader_Lenovo_V1.0.2
Download and extract to a folder without spaces and letters  Downloader_Lenovo_V1.0.2.7z (he and the driver came with firmware). Run as administrator flasher.
3. Preferences change is not necessary, they are permanent :
93605f87e500be6127d21fae293155e1.png
4. Select the folder in which you unzipped the firmware :
49ee79477b3d78eaf1c932f38ab9d668.png
5. Press the start button of the firmware :
e871e76edef3fab920b2b59d3221f593.png
6. Turn off the smartphone, hold down the volume up, turn the power button smartphone, after vibro release the power button and then after a few seconds by releasing the volume button – you will see this menu :
356ae62a7488fbe9bee1ecc2b58a5df3.jpg
7. Connect your smartphone to your PC with a USB cable to the port (preferably black, USB 2.0) on the back of your PC (on the motherboard). The program will translate it into a flashing mode when you first plug it in, install the drivers for new devices and smartphone will be sewn :
8c8b3519772c96eb0e182755eb1ca559.png
8. The flash will take 6-7 minutes, the end of the program will tell you :
e4a502a7e301c8a2f0ff43e944a11d05.png
9. Turn off your smartphone, after the first start by entering the region code after changing the region recommend to immediately wipe do – and use your smartphone!
PS And a few wishes and parting words:
  • If you do not have the strength to even install the drivers for the chips Qualcomm, the likelihood of a successful process of pouring firmware drops to 3%.
  • I advise you to make a fill flash with a PC that is running Windows 7 (in Windows 8.1, but the likelihood of a successful process of pouring firmware reduced to 30%).
  • The whole process of the firmware with this method is safe, but only in the right hands!
  • Good luck to all!

Comments

  1. very nice bro thanks.....................................

    ReplyDelete
  2. Hello. Even after installing Qualcomm drivers am not able to see device in device manager. Tried everything. My device is already in fastboot state. any solution?

    ReplyDelete

Post a Comment

Popular Posts