moto e2 struck on logo

moto g2 strucking on logo

 Power Off your device and Open in Bootloader mode.Press nd hold Power + Volume Down button till yu see sme text on screen

Now Open the folder where yu hav extracted the Firmware files nd open cmd there. Hold Shift Key and Right Click anywhere in the folder then Click Open Command Prompt Here

If yur Firmware File has tar.gz extension

Den type below givn cmmd

flashall.bat /eu

Wait for the Firmware files to be flashed on yur device den it vil boot
automatically

                                        click here this the moto g2 zip lile

                                        Type Below given cmmds to flash the device
                                                   after that type what i have given

 mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot

After al done yur phone will reboot automatically
             this is tested by veera